Short:    Internet TCP/IP stack (MUI module)
Author:   kruse@nordicglobal.com
Uploader: kruse@nordicglobal.com
Version:  3.0d
Type:     comm/tcp
Requires: OS 2.04 or higher
Replaces: comm/tcp/Miami30MUI.lha

This archive contains the MUI user interface module
for Miami 3.0d. Miami is an easy-to-use TCP/IP stack
for Internet access or access to local networks,
complete with dialer, PPP, (C)SLIP and
auto-configuration tools. You will also need other
archives -- see below.

Miami can be used with modems, ISDN boards, ISDN
terminal adapters, cable modems, or network boards
(Ethernet/Arcnet).

AmiTCP/IP, ppp.device or cslip.device are NOT
needed for Miami.


Minimum requirements:

 - Any Amiga with Kick/WB2.04 or higher

 - recommended: MUI 3.8 or higher


Miami 3.0d is distributed across five archives: one main
archive, two archives with program binaries, and two
archives with GUI modules.

 - Miami30d-main.lha:   Main archive. *Everybody* needs to
                        download this archive.

 - Miami30d-000.lha:    Program binary for 68000/010
                        CPUs.

 - Miami30d-020.lha:    Program binary for 68020/030/040/060
                        CPUs.

 - Miami30d-MUI.lha:    MUI user interface module for Miami.
                        Requires MUI 3.8 or higher.

 - Miami30d-GTL.lha:    GTLayout/GadTools user interface
                        module for Miami.


You need to download the following archives:

 - The main archive

 - ONE of the program binary archives (000/010  OR
   020/030/040/060)

 - AT LEAST ONE of the user interface modules (MUI or
   GTLayout or both)


Holger Kruse
kruse@nordicglobal.com